杯状管延迟站Cupwise Tube Delay Station [Nebula]

P2P | 22 January 2026 | 102 MB

Tube Delay Statoin 可以实现多种效果，包括拍击延迟、重复回声、静态镶边、倍增、短反馈混响、失真等等。延迟时间范围从 0.2 毫秒到 1.884 秒，增量在 0.2 毫秒到 4 毫秒之间，具体取决于时间范围。

延迟本身可以设置为 63 种不同的采样音调，每种音调都有不同的频率响应曲线。许多音调会以各种方式过滤低频和/或高频，但也有一些音调的频率响应几乎完全平坦，因此选择非常丰富。此外，还有 9 种采样失真可以与主音调结合使用，从而获得微妙的增厚、明显的颗粒感或彻底的失真效果。

当使用反馈并结合对输入进行滤波的音调选择时，重复回声会随着每次重复而逐渐被滤波。这可以用来产生不断变化的音色质感和声音的层次感。声像控制可以调整延迟的声像位置，当然，在反馈作用下，每次重复都会使声像位置远离中心。

我创建了一个特殊的“声像抖动”控件，它可以让你引入一定程度的随机声像抖动。延迟效果会在你设置的主声像控制位置附近随机移动。还有一个“抖动速率”控件，可以设置延迟效果跳到下一个随机声像位置的速率。

本产品目前仅适用于N4，与N3不兼容。

Slap back delays, repeating echoes, static flange, doubling, short feedback reverbs, distortion; all of this and more is possible with the Tube Delay Station. Delay times range from .2ms to 1.884 seconds, with choices in increments between .2 to 4ms, depending on the time range.

The delay itself can be set to any of 63 different sampled tones, each with different frequency response profiles. Many filter the lows and/or highs in various ways, but some are almost perfectly flat, so there’s a lot of variety. There are also 9 sampled distortions you can combine with the main tones, for some subtle thickening, noticeable grit, or complete destruction.

When using feedback along with a tone selection that filters the input, the repeating echoes get filtered more and more with each repeat. This can be used to produce evolving sonic textures and washes of sound. The pan control allows panning of the delay, and of course with feedback, each repeat moves further and further away from the center.

I created the special ‘pan wiggle’ control, which allows you to introduce an amount of random pan wiggling. The delay will randomly move around the position where you set the main pan control. There’s a ‘wiggle rate’ control that sets the rate at which the delay will jump to the next random pan position.

This product is currently for N4 only, not compatible with N3.

https://www.cupwise.com/shop/tube-delay-station/