逐频侧链闪避Orra Audio Orra Ducker v1.0.1 [WiN]

MOCHA | 23 June 2026 | 14.5 MB

逐频侧链闪避| 大多数人使用侧链压缩来实现闪避，但这会降低整个信号的音量。Orra Ducker 只对实际发生冲突的频率进行闪避，它可以从任何音轨和任何 DAW 中触发。而且，借助 Orra Link，侧链路由直接集成在插件中，因此从不同来源向多个实例发送信号，在任何 DAW 中都能实现相同的简单工作流程。

* 频谱级、逐频段闪避，覆盖约 1000 个频段，而非宽带
* 可绘制聚焦频段，将闪避目标对准低频、刺耳的中频或全频段
* 分辨率控制：可实现精准的窄频段闪避或宽广柔和的闪避
* 通过 Orra Link 在每个音轨上叠加多个实例，支持 36 个侧链通道，可从任何 DAW 中的任何音轨进行键控
* 四种延迟模式：HQ、平衡、快速以及零延迟宽带实时监听模式
* 一个大型分析器同时显示输入、侧链、输出和实时闪避曲线
* 可选择使用自键控、宿主侧链总线或任何 Link 通道进行键控
* 柔和的聚焦频段、立体声检测器链接以及每个控制

项的完全自动化 闪避的是重叠部分，而非整个信号
逐频段而非逐推子进行控制。Orra
Ducker 对两个信号运行 FFT，并仅在两个信号实际重叠的频率处进行闪避，因此底鼓可以在贝斯声中腾出空间，而不会降低整个贝斯声线。

传统的路由方式：
在同一音轨上运行多个闪避器，每个闪避器都基于不同的音源，虽然在某些 DAW 中可以实现，但操作繁琐，而且每个 DAW 的设置都不同。需要辅助音轨、总线切换、发送路由，每次切换都要和宿主软件进行一番“斗争”。
虽然可行，但每个 DAW 的麻烦程度都不一样。Orra

的方式：
Orra Link 让您摆脱路由的烦恼。音源选择直接在插件内完成，每个实例只需从下拉菜单中选择触发信号，最多可将 37 个侧链音源连接到同一音轨。无需辅助音轨，无需总线切换，无论您使用哪个 DAW，工作流程都完全相同。
一个工作流程，在所有 DAW 中都一样。

未修改的二进制文件，阻止主机：读取 _mocha.txt

Per-frequency sidechain ducking | Most people use sidechain compression for ducking, which turns down your whole signal. Orra Ducker ducks only the frequencies that actually collide, keyed from any track, in any DAW. And with Orra Link, sidechain routing lives right in the plugin, so feeding several instances from different sources is the same simple workflow in every DAW.

* Spectral, per-bin ducking across ~1000 frequency bins, not broadband
* Draw the focus band, aim the duck at just the lows, the harsh mids, or the full range
* Resolution control: carve surgically narrow or tilt broad and gentle
* Stack multiple instances per track via Orra Link, 36 sidechain channels, keyed from any track in any DAW
* Four latency modes: HQ, Balanced, Fast, and a zero-latency broadband Live mode for monitoring
* One large analyzer shows input, sidechain, output, and the live ducking curve together
* Self-key, host sidechain bus, or any Link channel, your choice per instance
* Soft-edged focus band, stereo detector linking, and full automation on every control

Duck the collision, not the whole signal
Per-frequency, not per-fader.
Orra Ducker runs an FFT on both signals and ducks each frequency only where the two actually overlap, so a kick can clear space inside a bass without dropping the whole bass line.

The Usual Routing
Running several duckers on one track, each keyed from a different source, is doable in some DAWs but fiddly, and the setup is different in every single one. Aux tracks, bus juggling, send routing, and a fresh fight with your host every time you switch.
Possible, but a different headache in every DAW.

The Orra Way
Orra Link takes the routing off your plate. Source selection lives right in the plugin, and each instance just picks its trigger from a dropdown, up to 37 sidechain sources feeding one track. No aux tracks, no bus juggling, and the exact same workflow no matter what DAW you are in.
One workflow. Identical in every DAW.

Un-modified binaries, block host: read _mocha.txt

https://www.orraaudio.com/products/orra-ducker