动态处理器TBProAudio DSEQ3 v3.9.14 MacOS

MORiA | AU | VST | VST3 | 11 MB

DSEQ 是一种在频域工作的动态处理器。DSEQ 通过自适应频段，实时消除数字信号的刺耳感。

DSEQ 可用于所有混音和母带处理场景
——消除人声齿音
——抑制鼓、吉他、人声录音中的共振
——消除数字噪音
——平衡混音
——消除频率区域的掩蔽效应
——支持粉红噪声混音/母带处理

DSEQ 完全在频域内工作，凭借自适应动态均衡器，提供极高的频率选择性。即使在高增益下，DSEQ 也能保持最高的透明度。这可以避免失真、相位问题和人为瑕疵，即使是处理非常苛刻的音频素材。此外，DSEQ 还提供多种音质模式，可以对单个频率进行精细调节。

此外，DSEQ 还提供了一个非常易用的界面。只需几个参数（阈值、选择性和起音/释放时间），即可满足广泛的应用需求。即使是初始参数设置也能让你的混音更加通透。只需选择阈值参数并逐步降低即可。之后，你可以使用预滤波器来专注于特定的频率区域。

DSEQ 内置 AB-LM Lite，提供感知响度匹配功能。DSEQ
支持自定义阈值，使其成为一款智能多频段压缩器。DSEQ2
引入了智能 AI 功能和相应的 GUI 界面，可根据输入素材自动设置 DSEQ。DSEQ3
引入了增益衰减频谱图，并支持自由缩放和调整 GUI 界面大小。

动态控制
DSEQ在频域分析输入信号或侧链信号，并根据阈值触发动态均衡器。此过程针对
快速傅里叶变换(FFT)过程中可用的每个特定频率进行。

频率选择性决定了相邻频率是否以及在多大程度上受到影响。“启动”和“释放”控制动态均衡器的响应速度。

斜率参数允许您在输入信号或侧链信号进入动态均衡器之前调整其频谱。斜率值越大，高频动态均衡器触发越早，低频动态均衡器触发越晚。如果您使用粉红噪声混音/母带处理方法，只需将斜率值设置为 +3dB 即可。

GR强度控制增益衰减，就像压缩机中的比率一样。

GR max 将整体增益降低限制在一定值内，以避免过度压缩和产生伪影。

自定义阈值
功能可将 DSEQ 变成一个灵活且高精度的多频段压缩器。您可以使用任何音频文件或 DAW 输入作为自定义阈值，使动态均衡器的阈值与您的音频素材相匹配。

交互式 EQ 显示屏
主 EQ/频谱显示屏，可让您监控 delta 频谱（输入减去输出）频谱并调整预滤波器响应曲线。

DSEQ的预滤波器控制功能
在整个频率范围内正常工作。您可以将效果限制在特定频率区域（例如，用于消除齿音的高频部分）。因此，可以使用预滤波器处理动态均衡器的信号。DSEQ 提供多种滤波器类型，例如切频滤波器、峰值滤波器和搁架式滤波器。滤波器灵敏度决定了动态均衡器对信号的识别强度。

智能AI
DSEQ V2凭借其智能AI功能，让您更轻松地驯服数字音频的刺耳感。只需像往常一样设置DSEQ，选择所需的AI学习模式，按下播放键启动DAW，然后点击学习按钮。DSEQ会在几秒钟内计算出最佳斜率和阈值参数。

功能
– 智能 AI 功能，
– 智能 AI GUI 页面
– 自适应斜率
– 自适应阈值
– 平滑线性/自然相位动态滤波器
– 全频范围处理，10Hz – 22kHz
– 7 种不同的质量模式：eco、eco、normal、high 和 ultra、ultra 2/3
– 左/右和中/侧处理
– 检测器信号的全局斜率（例如粉红噪声混音/母带处理）
– 自定义阈值曲线
– 增益衰减限制
– 压缩控制
– 自动最佳斜率参数计算
– 自动最佳阈值参数计算
– 12 个独立的预滤波器频段，模拟/数字风格
– 侧链支持
– 参数 A/B
– 撤销/重做
– 多种信号监听模式（预滤波器、增量、侧链）
– 多种频谱分析模式（立体声、左声道、右声道、中声道、侧声道）
– 感知响度匹配（由 AB-LM Lite 提供支持）
– 扩展的输入/输出表，峰值/RMS/EBU/VU
– 窄带扫描模式
– 所有处理模式的采样精确旁路切换
– 最小采样率最高支持 192 kHz
采样率——“真实”过采样，最高可达 4 倍
——离线渲染模式
——增益衰减频谱图
——EQ 速查表
——频谱斜率连续计算
——精确的参数输入
——易于使用的图形用户界面
——自由缩放和调整 GUI 大小
——众多预设，包括智能 AI 设置
——预设管理，包括自定义设置
——完全支持 DAW 自动化
——64 位内部处理
——高效的 CPU 使用率设计
——智能静音处理
——产品需要使用许可证密钥激活
——DSEQ 客户可免费更新

3.9.4版本新增内容
– 更新：AAX GR 表

系统要求：
Mac OS X 10.11 – 14（Intel、Arm M1/2/3），Metal GFX 显卡

DSEQ is a dynamic processor working in the frequency domain.DSEQ is removing digital harshness on the fly thanks to self-adjusting frequency bands.

DSEQ can be used in all mix and master situations
– de-essing vocals
– taming resonances in e.g. drum, guitar, vocal recordings
– removing digital harshness
– balancing the mix
– de-masking frequency regions
– support of pink noise mixing/mastering

DSEQ works fully in the frequency domain, providing very high frequency selectivity thanks to self-adjusting dynamic equalizers. DSEQ does its job with highest transparency even pushed hard. This avoids distortion, phasing and artefacts even with very critical sound material. And DSEQ offers several quality modes taming even singular frequencies.

On top DSEQ provides a very easy to use interface. With just a few parameters (threshold, selectivity and attack/release) a broad range of applications can be covered. Even the initial parameter set could make your mix more transparent. Just pick the threshold parameter and lower it step by step. From there you can start focusing on specific frequency regions by using the pre-filters.

DSEQ comes with AB-LM Lite providing perceptual loudness matching.
DSEQ supports custom threshold which turns DSEQ into a smart multiband compressor.
DSEQ2 introduces the smart AI function and a corresponding GUI page to setup DSEQ automatically depending on the input material.
DSEQ3 introduces gain-reduction spectrograph and free GUI scaling and resizing.

Dynamic control
DSEQ analyses the input or side chain signal in the frequency domain and triggers then the dynamic equalizers depending on the threshold. This is done for each singular frequency that is available
during the Fast Fourier Transformation (FFT).

The frequency selectivity determines whether and to what extent neighbouring frequencies are also affected. Attack and Release control how quickly the dynamic equalizers react.

The slope parameter lets you turn the spectrum of the input or side chain signal before going into the dynamic equalizers. With a positive slope value the dynamic equalizers with higher frequencies trigger earlier, with lower frequencies later. Just set the slope value to +3dB if you work witch pink noise mixing/mastering method.

GR strength controls the gain reduction like the ratio in a compressor.

GR max limits the overall gain reduction to a certain value to avoid over compression and artifacts.

Custom threshold
Custom threshold turns DSEQ into a flexible and highly accurate mulitband compressor. Use any audio file or DAW input as custum threshold to align threshold of dynamic EQs to your audio material.

Interactive EQ display
The main EQ/spectrum display which lets you monitor the delta spectrum (input minus output) spectrum and adjust the pre-filter response curve.

Pre-Filter control
DSEQ works normally in the entire frequency range. You can limit the effect to certain frequency regions (e.g. highs for de-essing). Therefore, the signal for the dynamic equalizers can be processed using pre-filters. DSEQ offers various filter types such as cut, peak and shelf filters. The filter sensitivity determines how strongly the signal is recognized by the dynamic equalizers.

Smart A.I.
DSEQ V2 makes it even easier to tame digital harshness thanks to its smart AI function. Set up DSEQ as normal, selected desired AI learn mode, press play to start the DAW and then the learn button. DSEQ calculates the optimal slope and threshold parameter within seconds.

Features
– smart AI function,
– smart AI GUI page
– adaptive slope
– adaptive threshold
– smooth linear/natural phase dynamic filter
– full frequency range processing, 10Hz – 22kHz
– 7 different quality modes: eco eco, eco, normal, high and ultra, ultra 2/3
– left/right and mid/side processing
– global slope for detector signal (e.g. pink noise mixing/mastering)
– custom threshold curve
– limit of gain reduction
– compression control
– automatic optimal slope parameter calculation
– automatic optimal threshold parameter calculation
– 12 independent pre-filter bands, analogue/digital style
– side-chain support
– parameter A/B
– undo/redo
– multiple signal monitoring modes (pre-filter, delta, side chain)
– multiple spectrum analyzing modes (stereo, left, right, mid, side)
– perceptual loudness matching (powered by AB-LM Lite)
– extended input/output meter, Peak/RMS/EBU/VU
– narrow-band sweeping mode
– sample-exact bypass toggle for all processing modes
– sample rates min. up to 192 kHz
– “real” over sampling, up to 4x
– offline render modes
– gain reduction spectrograph
– EQ cheat sheets
– continuous calculation of the spectrum slope
– precise parameter input
– easy to use GUI
– free GUI scaling and resizing
– many presets including smart AI setups
– preset management including custom setups
– full DAW automation support
– 64-bit internal processing
– very efficient CPU usage design
– smart silence processing
– product needs to be activated with license key
– free update for DSEQ customers

Whats new in this version
3.9.4
– UPDATE: AAX GR meter

System Requirements
Mac OS X 10.11 – 14 (Intel , Arm M1/2/3), Metal GFX card

Homepage

https://www.tbproaudio.de/products/dseq